OPERATING INSTRUCTIONS FOR MULTIMEDIA EQUIPMENT

EDUCATION ROOM 240

 

 

                TURNING EVERYTHING ON

 

1.      Turn on projector

Use "EIKI" remote and aim towards the projector.  Turn on the projector and wait 30 seconds for projector to warm up.

 

           

            PROJECTOR CONTROL

 

Use the MODE button on the EIKI remote to toggle between Computer 1 or Video.

 

            COMPUTER CONTROL

                       

Turn on the computer in the cabinet and turn on the monitor.   

 

VCR CONTROL

 

Place tape in VCR and use the remote control or push the buttons directly on the VCR.  (Remember - if using the remote you have to point towards the VCR.)

 

            LASERDISC CONTROL

 

The laserdisc player is connected through the VCR and will work when the VCR is not playing a tape.  If no picture - select the "Input" button on the VCR remote until picture comes up.

 

            SOUND CONTROL

 

Adjust ONLY the marked volume knob on the audio mixer.  Do not adjust any other buttons on the mixer.

 

TURNING EVERYTHING OFF

 

1.      Turn off Projector

Use the EIKI remote and turn off the power

Projector asks "Power Off?" on screen

Select "Off" again.

Note:  Projector cannot be turned on again until it cools off and you see a green light on

the projector.

 

2.      Shut down the computer and turn off the monitor

 

 

 

MAKE SURE EVERYTHING IS LOCKED UP WHEN YOU LEAVE.